PDroid Custom Kernel (3.0.13) BP2 ICS sahaja

PERHATIAN!!! Pastikan sudah ROOT dan sudah install CWM Recovery!!!


PDroid Custom Kernel [CWM][ROOT USER ONLY]



Support 166Mhz cpu freq (standard 250Mhz paling lowest)

Quote :

Changelog:
v01g
-More OC (not yet developed)
v01f
init.d-functional
-OC 1.1 GHz, 1.2 GHz, 1.3 GHz and 1.4 GHz (experimental)
SmartassV2-Back
-Support zram
v01e
-zcache
-optimization VFP coprocessor
-Add I / O Scheduler SIO and BFQ (Thanks to OldGeek)
v01d
-Added freq 166Mhz
v01c
- init.d Support (root and update busybox required)
v01b
functional Vibration-
v01a
-Adding governor: Smartass V2 and hotplug
- Some minor mods

Hotplug info:

"The Hotplug governor performs very similarly to the OnDemand governor, with the added benefit of more precise about Being how it steps down through the kernel's frequency table as the governor Measures the user's CPU load. However, the Hotplug governor's Defining feature is icts Ability to turn off unused CPU cores falling on low CPU utilization of périodes. This is known as "hotplugging."



SmartassV2 info:

"Version 2 of the original smartass governor from Erasmux. Another favorite for Many a people. The governor aim for an "ideal frequency", and ramp up more aggressively Towards this freq and less aggressive after. It uses different ideal frequencies for screen on and screen off derived, namely awake_ideal_freq and sleep_ideal_freq. This governor scales down very fast CPU (soon to hit sleep_ideal_freq) while screen is off and scales up to Rapidly awake_ideal_freq (GS2 for 500 mhz by default) When screen is on. There's no upper limit for frequency while screen is off (Unlike Smartass). So The entire frequency ranks is available for the governor to use falling on one screen and off-screen state. The motto of this governor is a balance Between performance and battery.





Download link utk :

1) version 01d -> [You must be registered and logged in to see this link.]

2) version 01e -> [You must be registered and logged in to see this link.]

3) version 01g -> [You must be registered and logged in to see this link.]

*default kernel min 166mHz - max 166mHz. Jd ubah max ikut kehendak anda.





Cara install:

1. Download dan letak dlm sdcard...

2. Flash melalui ClockWorkMod Recovery (CWM)

3. Reboot





Guna app One Power Guard, NoFrills atau Setcpu utk setup kernel

(salah 1 ja tau)

*saya guna Hybrid dgn maksima 834mHz

*Hotplug guna 1 core ketika screen off, jimat bateri...

* Jangan guna zzmove governors, sebab pegasusq hanya guna single core.





utk yg nak kembali ke kernel asal Wiko flash blk :


Stock Kernel Wiko -> [You must be registered and logged in to see this link.]

Thanx admin Fyrus Pyro 4 dis tuto (i just edit it)

ROM apa yg sesuai utk kernal ni...?

stok rom bp2 v17

stok rom wiko v15